It’s not exactly a Christmas tree, but it is a very clever one.
If you look closely at it, you’ll see that the tree has a couple of extra points.
In addition to the point on the bottom, there are two small, black dots on top.
These are called “circles” and are there to indicate that this tree is an extension of the base of the tree itself.
The two points, and the dots on the base, form a circle.
So how did this tree come to be?
It’s actually very easy to do, and very satisfying.
The tree itself is made of pine.
It’s also made of a resin called “fiberglass.”
When you drill a hole into the tree, you’re actually drilling into a “brick” which is a kind of foam.
The inside of the brick is called the base.
Then, when you drill into the base and insert the tree’s base, you can see the fiberglass inside of it.
This allows you to use a very thin, lightweight, and highly durable wood.
This is the same kind of fiberglass that makes the tires of your car.
And it’s also very lightweight, since it’s made from the same resin as the tree.
And, of course, it has to be big enough to support the tree when you’re working it.
If the tree is too big, it will fall.
And if the tree falls, it’ll break the wood and cause structural damage to the tree as it sits in the tree trunk.
In the video below, I have a guy try it out.
First he drilled a hole, then he took it out and put it in a tree.
Then he drilled it again and put the tree back.
He tried that with a small tree.
He was disappointed.
When I put the little tree in the trunk of my car, it’s not a big tree at all.
It just looks like a pile of lumber.
I can see in the photo above, that I’m going to have to do some more work to get the tree to the size I want it to be.
In fact, I’ve already done some work on it.
The fiberglass is going to be glued in.
So, in order to get it right, I’m not going to go through all the trouble of making the tree out of fiberglas.
I’m just going to drill a new hole.
I just don’t know how to do that.
The trick is to do it quickly.
I don’t have time to do all that other stuff.
I’ve got to do the tree right now.
And this is where the magic of this trick comes in.
First, I need to make sure that the wood is strong enough.
Because when you cut the tree down, you will see that it’s really hard.
And then you will have to cut a hole for the fiber, and then you’ll have to glue it in.
But I can do this fast.
Because I have to take care of that first.
The next step is to make the tree look good.
This tree is going with a lot of bright colors, which is nice, because they are going to help the people who are looking at it. And I don